De Profundis Stage Tank Kit So40. – Lateral complet kit for 7L/ SO40 tank.- DIR
Find on Amazon.com: De Profundis Stage Tank Kit So40
Apeks Single Tank Adaptor. The single tank adapter is a great way to quickly attach a single cylinder to a back plate or the WTX harness.Made of 316 stainless steel Weighs 1 lb. 1 oz. (490g) without hardware Comes with 2 sets of bolts and one pair of washers and wing nuts 1 bolts for directly mounting to back plate 1.5 bolts for mounting to back plate inside WTX harness Nylon tank bands are not included and may be purchased separately
Find on Amazon.com: Apeks Single Tank Adaptor
Spare Air Spare Air. Spare Air BottleTHE SPARE AIR PACKAGE FOR DIVERS EVERYWHERE!!Designed to get you to the surface in the event of an emergency, yet small enough to not even know you are wearing it! DONT GO DOWN WITHOUT IT!!Package Includes: -REFILL ADAPTER-Fills off SCUBA tank-COVERED HOLSTER-Mounts to BC-LEASH-Prevents lossThe preferred choice of Recreational Divers Â·3.0 cubic feet of air Â·Tank finish in Neon Yellow for safety Â·Easily refills from your own SCUBA tank with included refill adapter Â·Easily attaches to your BC with included holster and safety leash Â·Small, hands-free, nearly neutrally buoyant Â·Breathe on demand regulator -No complicated instructions Â·Completely redundant back-up miniature SCUBA system Faster than buddy breathing and easier than an octopus.SPECIFICATIONS:Maximum Capacity 3.0 cu ft / 85 litresLength 13.4` / 34 cmDiameter 2.25` / 5.71 cmMaximum Pressure 3000 psi / 200 barWeight (full) 2.17 lb. / .985 kgSurface Breaths* 57Water Volume 26.62 cu in / .42 liters*Based on 1.6 liters per breath MORE DETAILS:Regulator Body – The simple rugged design utilizes the same time proven technology found in typical regulators used by SCUBA Divers around the world.The always-on, breathe on demand, balanced single stage regulator is easy to maintain and service.Pressure Indicator – The standard indicator is easy to read by the White Indicator Pin rising up when the Spare Air has filled to 3000psi.A Dial Gauge Pressure Indicator is available as an optional accessory.Purge Button – Clears the regulator and empties the Air Tank.Mouthpiece – Standard regulator mouthpiece carried by SCUBA Diving Shops everywhere and is the same model used on most regulators.Check Valve – Remove the cover and attach the yoke style Refill Adapter (included with every Spare Air). Attach the other end to a filled SCUBA tank and in 30-60 seconds, your Spare Air is full.3000 PSI Aluminum Tank – This SCUBA tank is manufactured just like standard SCUBA tanks, with the same safety features. The cylinder should be inspected annually and hydrostatically tested once every 5 years.
Find on Amazon.com: Spare Air Spare Air
Dive Rite Stage Bottle Strap So40. Our Stage Bottle Rigging comes with everything a diver needs to correctly set up secondary bottles for years of technical diving.Our 1-inch (2.54 cm) nylon webbing with 2,200 lbs (998 kgs) tensile strength forms the carrying strap. Resistant to breakage, rot and splitting, nylon webbing creates a durable and long-lasting foundation for stage rigging, yet can be cut free in case of entanglement. Rugged elastic hose retainer band resists rolling and tearing and has the right amount of stretch.A large webbing loop on the retainer is easy to grip even with gloves on.Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.A 1-inch (2.54 cm) piece of tubular webbing and a short piece of clear tube are provided to cover the tank clamp and screw for abrasion protection.A longer piece of clear plastic tubing slides over the nylon webbing to form a comfortable handle on the carrying strap. Stainless steel XL bolt snaps.* Stainless steel XL bolt snap * One-inch (2.54 cm) nylon webbing strap with 2,200 lbs (998 kgs) tensile strength* Neoprene-infused elastic hose retainer band resists rolling, tearing and abrasion* Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion* One-inch (2.54cm) tubular webbing, provides diver/tank clamp abrasion protection
Find on Amazon.com: Dive Rite Stage Bottle Strap So40
Apeks Surface Pressure Gauge M25. A 360 bar HP contents gauge that can be fitted to a cylinder to check the pressure. With push button vent. Available with Yoke clamp or DIN fitting.
Find on Amazon.com: Apeks Surface Pressure Gauge M25
Scubapro Twin Tank Bands Ss 140mm. – Stainless steel bands for the assembly of twin tanks.- 50 mm wide, double reinforcement at the fixing point, laser etched SCUBAPRO logo.- For bottles 2 x 140 mm.
Find on Amazon.com: Scubapro Twin Tank Bands Ss 140mm
Scubapro Surface Pressure Gauge. The Surface Pressure Gauge allows for a quick check of the tank pressure.- Satin chrome plated brass body.- Available in INT or DIN configuration- Scale to 300 bar.
Find on Amazon.com: Scubapro Surface Pressure Gauge
Scubapro Single Tank Adaptor. – Attaches assembly point to extend the stainless steel back plate for dives with single tanks.- Includes two SCUBAPRO Super-Cinchstraps for the optimum tank attachment.
Find on Amazon.com: Scubapro Single Tank Adaptor