Dive Rite Nomad Lt – Sidemount System Complete Ow

Dive Rite Nomad Lt - Sidemount System Complete Ow
Dive Rite – Dive Rite Nomad Lt – Sidemount System Complete Ow

Dive Rite Nomad Lt – Sidemount System Complete Ow. Designed for warm water diving with aluminum 80s, the Nomad LT Bluewater is designed for the sidemount diver who is diving in open bodies of water. The low profile design packs easy for travel at only 5.5 pounds including all the hardware. The lift is pushed toward the bottom by two baffles to keep the lift in the small of the back. The Super Fabric back is tough and puncture resistant. The inflator assembly is routed over the shoulder just like any openwater BC and an epaulet secures it over the shoulder. The lower dump valve is located on the lower backside of the BC.We use two seperate bungees that attach to our exclusive daisy chain connection design so one size bungee works for any size diver. * Small volume steel cylinders can be used when diving a dry suit.*The Nomad LTs exceptional design creates the first sidemount rig of its kind that is simple to set up and configure with an all-in-one webbing harness and wing [continued]Specifications:- All-in-one, non-modular rig is one complete piece.- Comes standard with our tank chokers (BC2720) and ring bungees (BC2722).- Standard 12-inch elbow inflator. 16-inch available upon request.- Black outer bag is made of SuperFabric brand technology and 1000 denier Cordura® offering superior durability.- Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools- Marine grade stainless hardware- One size fits all- Made in the U.S.A.

ScubaStoreDive Rite Nomad Lt – Sidemount System Complete Ow

Find on Amazon.com: Dive Rite Nomad Lt – Sidemount System Complete Ow

Oms Harness Comfort Ii W/o Backplate

Oms Harness Comfort Ii W/o Backplate
Oms – Oms Harness Comfort Ii W/o Backplate

Oms Harness Comfort Ii W/o Backplate. Comfort Harness System II with adjustable Oblique webbing, (4) Chest Mounted D-Rings, and a pull dump tunnel on each shoulder pad.Innovative harness system that can be coupled with the Aluminum or Stainless Steel back plates.

ScubaStoreOms Harness Comfort Ii W/o Backplate

Find on Amazon.com: Oms Harness Comfort Ii W/o Backplate




Scubapro X-tek Pure-tek Single Tank Set D.i.r. 18

Scubapro X-tek Pure-tek Single Tank Set D.i.r. 18
Scubapro – Scubapro X-tek Pure-tek Single Tank Set D.i.r. 18

Scubapro X-tek Pure-tek Single Tank Set D.i.r. 18. Features:- 18 kg/30 lb lift capacity Donut Wing.- 27 kg/ 60 lb lift capacity Donut Wing for twin cylinders.- 1680 DEN Ballistic Nylon outer shell.- 420 DEN Nylon inner bladder.- Stainless Steel back plate.- Continuous harness with stainless steel back plate for optimal stability when using twin cylinders.- Two shoulder D-rings and one waist stainless steel D-ring on the left side.- 50mm wide crotch strap with two stainless steel D-rings.- Single Tank system with single tank adapter and two super cinch straps.

ScubaStoreScubapro X-tek Pure-tek Single Tank Set D.i.r. 18

Find on Amazon.com: Scubapro X-tek Pure-tek Single Tank Set D.i.r. 18

Scubapro X-tek Pure Tek

Scubapro X-tek Pure Tek
Scubapro – Scubapro X-tek Pure Tek

Scubapro X-tek Pure Tek. – Stainless Steel back plate.- Secure continuous webbing provides custom fit.- Stainless steel waist buckle.- Two shoulder D-rings and one left D-ring on the waist belt.- Adjustable 50 mm crotch strap with two stainless steel D-rings.- Attachment of shoulder straps on back plate with tri-glide fasteners.

ScubaStoreScubapro X-tek Pure Tek

Find on Amazon.com: Scubapro X-tek Pure Tek

Apeks Wtx4 Wing

Apeks Wtx4 Wing
Apeks – Apeks Wtx4 Wing

Apeks Wtx4 Wing. This is a new buoyancy cell in the WTX Series of floatation products. The WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too!- The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tank bands or using center bolts.- Highly efficient drains allow water to empty quickly after a dive.- Outer bag constructed out of Armorshield Cordura® to resist abraision and fading.- Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots.- The airway comes off of the back top center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. – Features the Apeks technical inflator with brass buttons.- Pull dump on inside lower left.

ScubaStoreApeks Wtx4 Wing

Find on Amazon.com: Apeks Wtx4 Wing

Scubapro Backplate Aluminium

Scubapro Backplate Aluminium
Scubapro – Scubapro Backplate Aluminium

Scubapro Backplate Aluminium. This back plate features optimized stability. Ergonomic shape for maximum comfort and eliminates back stress on extended dives.Numerous options on where to attach storage pack and additional various accessories.The perfect travel companion. Maximum stability despite low weight.

ScubaStoreScubapro Backplate Aluminium

Find on Amazon.com: Scubapro Backplate Aluminium

Oms Jon Line

Oms Jon Line
Oms – Oms Jon Line

Oms Jon Line. Jon Line with Integrated Pouch and SS Snap 8 longThis new OMS® Jon line comes in an 8 ft. length and is constructed from special high tensile, abrasion resistant nylon webbing, has a loop at one end, a Stainless Steel 3.5 Swivel Snap at the other end, and is integrated into a special easy to deploy, easy to stow Velcro pouch.

ScubaStoreOms Jon Line

Find on Amazon.com: Oms Jon Line

Hollis Ride

Hollis Ride
Hollis – Hollis Ride

Hollis Ride. TECHnically the worlds best travel BC. Here is the all new RIDE. Its lightweight at just over 6lbs but packed with technical features. It includes a simple yet strong nylon harness, that is one size fits most and easily adjustable. The wing is a rugged one-piece 1000 denier cordura and comes in two sizes: 23lbs and 37lbs. Standard are the stainless steel 2` d-rings on the shoulders and hips, padded crotch strap, backpad and lower storage pouch. It also has the ability to dive singles or twins (depending on wing size).FEATURES:-Lift capacity 23 lbs & 37 lbs.-One size fits most.-1000 denier CorduraTM w/ 15 mil PU lamination – one piece.-Contoured, lightweight backpack w/back pad, lumbar support & storage pouch.-2 shoulder stainless steel bent D-rings, 2 lower hip D-rings.-Quick adjust shoulder and waist strap.-Right shoulder inflation with elbow.-Lower left pull dump.-10lb (4.5kg) interchangeable quick release weight pockets – optional.-5 lb (2.27kg) non-dumpable rear weight pockets – optional.-System weight: 6.5 lbs.

ScubaStoreHollis Ride

Find on Amazon.com: Hollis Ride

Dive Rite Stainless Steel Backplate

Dive Rite Stainless Steel Backplate
Dive Rite – Dive Rite Stainless Steel Backplate

Dive Rite Stainless Steel Backplate. Dive Rites stainless steel XT backplate is one of the few backplates that is made in the USA. All Dive Rite backplates are laser cut and individually finished by hand. This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316L grade stainless steel. Weighing in at 5.2 lbs (2.4kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.The XT backplate is set up with 11` (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two holes for the upper bolt to give user adjustability of tank height. Two sets of 2` slots along the center allow divers to use the backplate for single tank diving without the need for a single tank adapter. A series of slots and holes along the outer11 Gauge 316L Stainless Steel5.2 lbs (2.4kg)10.5` (26.7cm)(widest point) x 15` (39.4cm)1.25` (3.2cm) depth (with contour)In-water buoyancy: -5 lbs (-2.27 kg)Made in USAThe Stainless Steel backplate is ideal when diving aluminum tanks because it adds weight to counteract aluminum buoyancy characteristics.When traveling with a rigid backplate, be sure to disassemble your plate / harness from the wing and store them separately during travel. This will reduce the possibility of the plate impacting and damaging the wing or other gear caused by objects shifting.The 316L grade of stainless steel is a rust resistand grade of stainless steel, however rinsing with freshwater after saltwater use is still recommended.

ScubaStoreDive Rite Stainless Steel Backplate

Find on Amazon.com: Dive Rite Stainless Steel Backplate

Hollis Elite 2 Harness

Hollis Elite 2 Harness
Hollis – Hollis Elite 2 Harness

Hollis Elite 2 Harness. Tech/Rec is at its best with the Elite 2 Harness. The Elite 2 Harness System offers you all the features of a technical harness with the added comfort that recreational divers look for.Features:-Adjustable shoulder straps w/ quick release buckles provide easier donning and doffing of equipment.-Adjustable and removable shoulder pads w/ 3 adjustable stainless steel bent D-rings on each side .-316 `marine grade` stainless steel used for all hardware waist buckle.-Adjustable sternum strap included allows for custom fit.-Backplate sold separately. -System weight (harness only): 1.7lbs (0.77kg).

ScubaStoreHollis Elite 2 Harness

Find on Amazon.com: Hollis Elite 2 Harness

Dive Rite Assembling Screw

Dive Rite Assembling Screw
Dive Rite – Dive Rite Assembling Screw

Dive Rite Assembling Screw. The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates).Another common use is to secure the wing to the TransPac harness or hard backplate when rigged for a single tank–When the BCD is taken off a single tank (perhaps to swap tanks between dives), the cam straps alone are not enough to keep the wing neatly attached to the harness.Designed to fit through a 3/8 hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place.Sold as a set of two.

ScubaStoreDive Rite Assembling Screw

Find on Amazon.com: Dive Rite Assembling Screw

Dive Rite Nomad Exp Harness Sidemount

Dive Rite Nomad Exp Harness Sidemount
Dive Rite – Dive Rite Nomad Exp Harness Sidemount

Dive Rite Nomad Exp Harness Sidemount. A longer Gusset Control System (GCS) now allows the diver to control lift by controlling the profile of the wing. This is especially important for divers who wear aluminum tanks when sidemounting or dive the Nomad EXP with a single tank.The Nomad EXP is designed for value and convenience as an all-in-one, complete harness and wing system where the harness, wing, buttplate are one, continuous rig. Without the Gusset Control and without using the wing keepers on the waist belt, the Nomad EXP delivers a full 60lbs of lift. Using the GCS and wing keepers, divers are able to streamline the wings lift according to the tanks they will carry. The Nomad EXP is designed for sidemount, doubles backmount, single tanks or rebreather and the adjustability of lift helps the diver transition between tank configuration.Popular with tech divers for its trim characteristics as well as open water divers wishing to transition into technical diving down the road, the Nomad EXP provides proper trim by keeping the top of the wing narrow, allowing more lift at the bottom, which is ideal for rebreather and sidemount divers where heads-up buoyancy can be an issue.The Nomad EXP is available with a single bladder or dual bladder and comes standard with a 16-inch corrugated hose, a plain elbow, a 22-inch low pressure inflation hose and a 2-inch crotch strap. See Tech Specs for suggested lengths or go to DiveRite.com/TV and watch videos on how to set up and accessorize your Nomad.Made in the U.S.A.Note: Single tank divers will also require a pair of cam straps, which are not included. Double tank divers will also require a set of TransPac Stability Plates, which are not included.Common configuration is 16-inch corrugated hose with a 15-inch low-pressure inflation hose for an average 6-foot, 225lb man.Common length when sidemounting tanks using the bungee system only is 17-inch.

ScubaStoreDive Rite Nomad Exp Harness Sidemount

Find on Amazon.com: Dive Rite Nomad Exp Harness Sidemount

Poseidon One Harness Black

Poseidon One Harness Black
Poseidon – Poseidon One Harness Black

Poseidon One Harness Black. One Wing is designed both for beginners and for more experienced divers: Sportwing with excellent volume increase, Superior bladder deflation capabilities Four dump valvesPoseidons single tank wing is now available in the ONE design. Featured in 5 colors and made in CorduraTM 1000. Designed for beginners and for more experienced divers, the One Wing 50 is a sportwing with excellent volume increase and superior bladder deflation capabilities. When deflated, the ClamRetract system helps to reduce size and drag to the minimum. Four dump valves and an inflator with a stainless steel mechanism ensure inflation and deflation is always controlled and safe; and the shape of the bladder compensates for the weight of the tank when sub­ merged and gives you freedom to move in any direction. The narrow air passage behind the neck is designed not to impede head movement or foul regulators and hoses when inflated.The One Wing is made for equipment with a negative weight in water that does not exceed 19 kg (41.6 lbs) and has a lifting capacity of 225 N. It comes with a double, non­flex tank­band tank attachment system and can also be equipped with integrated weight pockets, accessory pockets, metal back plate, pinbolt kit and D­rings.The standard size has a waist belt with three rows of 40 cc holes; and the large size has six rows.This is a superb high­performing harness with ergonomic properties developed from advanced backpacks, and a unique variety of adjustment options to optimize both fit and comfort.The One Harness is an enhanced version of the Besea Advanced harness. We have made the shoulder straps narrower and integrated the waist belts and lumbar support in to one belt with the same ergonomic advantages but a better fit. All Poseidon Wings wings can be mounted.

ScubaStorePoseidon One Harness Black

Find on Amazon.com: Poseidon One Harness Black

Dive Rite Voyagerpac

Dive Rite Voyagerpac
Dive Rite – Dive Rite Voyagerpac

Dive Rite Voyagerpac. The VoyagerPac BCD is an all-in-one harness and wing that is a hybrid combination of the Voyager EXP wing and TransPac harness. Weighing only 6 lbs (2.72 kg), this lightweight travel BCD is certainly not a `lightweight` in other areas. Built from the same rugged materials as our technical harness and wing, the VoyagerPac is impressively constructed and will last for years.At 40lbs/20kg of lift, the VoyagerPac is designed for single, steel tanks or divers who require heavy weights due to cold water exposure protection. The VoyagerPac will accommodate one 95ft3/15 L tank with additional weight in pockets or a weight belt not to exceed 32lbs. (32lb QB Weight Pockets are sold separately).Features:- Hardware is streamlined with one epaulet on the left shoulder.- Standard shoulder pivots.- 2 bent chest D-rings.- 2 waist D-rings.- Stainless steel belt buckle. – TransPac sideplates are narrower and give more room on the waist belt for accessories. – Includes a chest strap, one standard 36-inch cam strap w/stainless buckle and 1.5-inch crotch strap. – Weight: 6 lbs (2.72 kg) – Dimensions: 22.5-in H x 19-in W (57.2 cm x 48.3 cm)

ScubaStoreDive Rite Voyagerpac

Find on Amazon.com: Dive Rite Voyagerpac

Hollis Sms 50 Travel

Hollis Sms 50 Travel
Hollis – Hollis Sms 50 Travel

Hollis Sms 50 Travel. Hollis `SMS` sidemount systems have been designed not just with cave divers in mind, but any sidemount diver. The new SMS50 is no exception. Built for sidemount only, this kit can be used in any environment from open water to overhead. Includes an adjustable, one size fits most harness based on a minimalist design; ideal for traveling sidemounters. First of its kind harness, wing and plate in one and ready to dive out of the box. Features:- Inner located elbow to avoid overhead interference- Built-in trim pockets – 3lbs upper shoulders & 3lbs (Pair) located on inner panel- Neoprene covered shoulder straps- Ready out of the box! (2) Tank bungees, (2) SS Cam bands, (4) SS Bolt snaps & line included with kit- Also includes a Sternum strap & Crotch strap- Low lift design for warm water with AL80s- Full visibility over your system – tanks, valves, regulators all within eyesight and adjustable at depth- Reduces additional gear: Doubles bands / Hardware / Manifold – Benefit when traveling- Aids in transporting gear to and from the beach or boat – one tank at a time- Streamlines profile which in turn reduces drag increasing your bottom timeSpecifications:- Air Cell – 23 lbs Lift- Rugged 1000 Denier Cordura- Sidemount Only harness- System weight 5 pounds

ScubaStoreHollis Sms 50 Travel

Find on Amazon.com: Hollis Sms 50 Travel