Apeks Wtx4 Wing

Apeks Wtx4 Wing
Apeks – Apeks Wtx4 Wing

Apeks Wtx4 Wing. This is a new buoyancy cell in the WTX Series of floatation products. The WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too!- The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tank bands or using center bolts.- Highly efficient drains allow water to empty quickly after a dive.- Outer bag constructed out of Armorshield Cordura® to resist abraision and fading.- Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots.- The airway comes off of the back top center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. – Features the Apeks technical inflator with brass buttons.- Pull dump on inside lower left.

ScubaStoreApeks Wtx4 Wing

Find on Amazon.com: Apeks Wtx4 Wing

Oms Wing Bc116

Oms Wing Bc116
Oms – Oms Wing Bc116

Oms Wing Bc116. BCs without retraction bands.The OMS® 32 lb., 45 lb., 60 lb. lift non-retraction BCs are made from the same superior materials as the banded BCs. They incorporate a pull dump located at the divers side lower left and an inflator hose exiting the center or slightly off center of the BC tank side.Slots are provided in the non inflated area for Cam Band usage.BC116-32B Non retraction single tank BC 32 lb. lift / Black 32 lb (14.5 kg) lift BC116-32R Non retraction single tank BC 32 lb. lift / Red 32 lb (14.5 kg) lift BC116-45B Non-retraction Single Bladder BC 45 lb. lift/ Black 45 lb (20.4 kg) lift BC116-60B Non-retraction Single Bladder BC 60 lb. lift/ Black 60 lb (27.2 kg) lift BC116-60R Non-retraction Single Bladder BC 60 lb. lift/ RED 60 lb (27.2 kg) lift Note: All stated BC lift capacities are +/- 2 lb. (1 kg)OMS ® BCSNASA, NOAA, NPS, World Class Record holders, deep explorers and those who simply demand the best specify OMS® BCs.Pull down the zipper of the outer cover of the OMS® BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU) and on the Chemically Resistant BCs 5-6 oz. TPU front and back . This thicker TPU coating helps prevent abrasion and increases puncture resistance. Most competitors use only 1/2 oz. or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks.Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU. Most of our competitors use only a thin plastic film bladder that is more susceptible to damage.There are other differences such as 100% quality assurance inspection for leaks, imperfections and defects before your OMS® BC is delivered. Elastomeric Retraction Band BC Features :1. DUAL BLADDER: Inflator hoses and Dump valves are interchangeable for a variety of unique hose configurations. The dual bladder model features a total of four (4) pull dump valves located:Divers Side bladder: lower left and top rightTank Side bladder: lower right and top left Colors: Black or Red2. SINGLE BLADDER: The single bladder model has two (2) relief valves located: divers right shoulder and divers lower left. Inflator hoses and Dump valves are interchangeable Colors: Black or Red (45 lb. & 60 lb. Black only)3. POWER DEFLATION / ORAL INFLATION: The unique elastomeric bands (use is optional) assist in deflation, but still allow the diver to orally inflate the BC.4. ELIMINATION OF AIR SHIFT: The OMS® elastomeric bands evenly compress the BC, eliminating the massive airshift associated with non-banded BCs that typically occurs when changing body plane.5. LOW DRAG / LOW SNAG: The OMS® bands typically retract the BC to a width less than the divers shoulders greatly reducing Drag and Snag potential.6. TRIM ADJUSTABILITY: By adding or eliminating bands in different parts of the BC, the diver can adjust: a) lateral trim to compensate for stage bottles, cameras, etc. b) Horizontal trim e.g. head up, down or level.7. Cam Band accommodation: (2) Top and (2) Bottom Slots are positioned in the non inflated area for Cam Band usage.Weight: 1,5kg aprox

ScubaStoreOms Wing Bc116

Find on Amazon.com: Oms Wing Bc116




Dive Rite Rec Exp Wing 16

Dive Rite Rec Exp Wing 16
Dive Rite – Dive Rite Rec Exp Wing 16

Dive Rite Rec Exp Wing 16. The Rec EXP is the flagship of our innovative line of 360 degree, donut-style wings. Donut wings tend to provide greater stability and control in the water, improving diver buoyancy and trim. The Rec EXP is shorter than our traditional Rec wing, which means it now fits a wider range of diver statures, where as our traditional Rec wing is best suited for tall divers or divers who require more buoyancy at the waist.A hybrid wing, the Rec EXP can be worn on single or double tanks making it one of our most popular wings. When diving single tanks, two clips on each side of the wing attach to D-rings on the backplate, keeping the wing close to the divers body. This avoids the taco effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control.The Rec EXP can be a single or dual bladder wing. Its unique bladder design allows a single bladder Rec EXP to be altered to become a dual bladder wing at a later date, if desired.At full lift capacity, the Rec EXP has 50 lbs/ 23kg of lift and can accommodate 95 ft3/15 L back mounted cylinders. The Rec EXP wing is designed for use with the TransPac, Transplate or metal backplates. Available in black with gray side panels. Made in the U.S.A.* Black outer bag is made of 1680 denier ballistic nylon that resists tears and abrasion* Inner bladder constructed of thick, 15-mil polyether aromatic polyurethane is resistant to abrasion and chemicals, has excellent strength and will resist the growth of microorganisms.* Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.* Two sets of two marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or to double tanks and set diver trim.* Approximate dimensions uninflated: 24-in H x 23-in W (60.9cm x 58.4cm)* 3.12 lbs (1.41kg)

ScubaStoreDive Rite Rec Exp Wing 16

Find on Amazon.com: Dive Rite Rec Exp Wing 16

Hollis S25 Lx Wing With Slots

Hollis S25 Lx Wing With Slots
Hollis – Hollis S25 Lx Wing With Slots

Hollis S25 Lx Wing With Slots. We are proud to release the new LX wing range, developed and tested by technical divers and 3 years in the making.Quality and performance are the two most integral features of our products, which is why we have reintroduced the proven S series and C series wings with key improvements. New materials include a 1680D Cordura for the exterior bladder and 420 nylon for the internal bladder. The LX design also includes a 360 degree internal retraction system. This has been added to match the design of the wing, allowing for a streamlined rig at all times. We have also added a new oval corrugated hose, redesigned OPV and stainless grommets to replace the mesh on the bottom of the wing.Every new LX wing includes a lifetime warranty.FEATURES:-Models include the S25 LX, S38 LX, C45 LX and C60 LX.-Welded flange and one piece retainer for servicing without the need for tools.-Outer shell constructed of HD Laminated 1680D Cordura.-420 nylon internal bladder.-Centrally located elbow to avoid tank valve/regulator interference.-Lower left pull relief valve.-Cam band slots.-Lifetime Warranty.

ScubaStoreHollis S25 Lx Wing With Slots

Find on Amazon.com: Hollis S25 Lx Wing With Slots

Oms Wing Larry Green

Oms Wing Larry Green
Oms – Oms Wing Larry Green

Oms Wing Larry Green. LARRY GREEN SIGNATURE SERIES BCThe 45 lb. and 70 lb. Larry Green Signature Series BCs incorporate the latest thinking in hydrodynamic engineering. Deep Underwater cave explorer Larry Green conceptualized this innovative design after many years of deep cave diving experience. Both the 45 lb. and 70 lb. lift BCs are designed and tailored to fit the full length of the cylinders providing increased control over trim and the reduced width dramatically reduces drag. These are the first BCs to be designed that are specifically tailored to fit aluminum 80 cu. ft and taller cylinders. BC-LGS45: Larry Green Signature Series 45 lb. lift BC (20.45 kg)BC-LGS70: Larry Green Signature Series 70 lb. lift BC (31.8 kg)OMS ® BCS: NASA, NOAA, NPS, World Class Record holders, deep explorers and those who simply demand the best specify OMS® BCs. Why-Pull down the zipper of the outer cover of the OMS® BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU) and on the Chemically Resistant BCs 5-6 oz. TPU front and back . This thicker TPU coating helps prevent abrasion and increases puncture resistance. Most competitors use only 1/2 oz. or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks.Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU. Most of our competitors use only a thin plastic film bladder that is more susceptible to damage.There are other differences such as 100% quality assurance inspection for leaks, imperfections and defects before your OMS® BC is delivered. Elastomeric Retraction Band BC Features :1. DUAL BLADDER: Inflator hoses and Dump valves are interchangeable for a variety of unique hose configurations. The dual bladder model features a total of four (4) pull dump valves located:Divers Side bladder: lower left and top rightTank Side bladder: lower right and top left Colors: Black or Red2. SINGLE BLADDER: The single bladder model has two (2) relief valves located: divers right shoulder and divers lower left. Inflator hoses and Dump valves are interchangeable Colors: Black or Red (45 lb. & 60 lb. Black only)3. POWER DEFLATION / ORAL INFLATION: The unique elastomeric bands (use is optional) assist in deflation, but still allow the diver to orally inflate the BC.4. ELIMINATION OF AIR SHIFT: The OMS® elastomeric bands evenly compress the BC, eliminating the massive airshift associated with non-banded BCs that typically occurs when changing body plane.5. LOW DRAG / LOW SNAG: The OMS® bands typically retract the BC to a width less than the divers shoulders greatly reducing Drag and Snag potential.6. TRIM ADJUSTABILITY: By adding or eliminating bands in different parts of the BC, the diver can adjust: a) lateral trim to compensate for stage bottles, cameras, etc. b) Horizontal trim e.g. head up, down or level.7. Cam Band accommodation: (2) Top and (2) Bottom Slots are positioned in the non inflated area for Cam Band

ScubaStoreOms Wing Larry Green

Find on Amazon.com: Oms Wing Larry Green

Poseidon One Wing 50 Grey

Poseidon One Wing 50 Grey
Poseidon – Poseidon One Wing 50 Grey

Poseidon One Wing 50 Grey. Poseidons single tank wing is now available in the ONE design. Featured in 5 colors and made in Cordura 1000. Designed for beginners and for more experienced divers, the One Wing 50 is a sportwing with excellent volume increase and superior bladder deflation capabilities. When deflated, the ClamRetract system helps to reduce size and drag to the minimum. Four dump valves and an inflator with a stainless steel mechanism ensure inflation and deflation is always controlled and safe; and the shape of the bladder compensates for the weight of the tank when sub­ merged and gives you freedom to move in any direction. The narrow air passage behind the neck is designed not to impede head movement or foul regulators and hoses when inflated.The One Wing is made for equipment with a negative weight in water that does not exceed 19 kg (41.6 Ibs) and has a lifting capacity of 225 N. It comes with integrated weight pockets, accessory pockets, metal back plate, pinbolt kit and D-rings.The standard size has a waist belt whit three rows of 40 cc holes; and the large size has six rows.FEATURES:- Sport wing- Four dump valves-Inflator with a mechanism in stainless steel-Non-flex tankband- ClamRetract system.

ScubaStorePoseidon One Wing 50 Grey

Find on Amazon.com: Poseidon One Wing 50 Grey

Poseidon One Wing 50 Blue

Poseidon One Wing 50 Blue
Poseidon – Poseidon One Wing 50 Blue

Poseidon One Wing 50 Blue. One Wing is designed both for beginners and for more experienced divers: Sportwing with excellent volume increase, Superior bladder deflation capabilities Four dump valvesPoseidons single tank wing is now available in the ONE design. Featured in 5 colors and made in CorduraTM 1000. Designed for beginners and for more experienced divers, the One Wing 50 is a sportwing with excellent volume increase and superior bladder deflation capabilities. When deflated, the ClamRetract system helps to reduce size and drag to the minimum. Four dump valves and an inflator with a stainless steel mechanism ensure inflation and deflation is always controlled and safe; and the shape of the bladder compensates for the weight of the tank when sub­ merged and gives you freedom to move in any direction. The narrow air passage behind the neck is designed not to impede head movement or foul regulators and hoses when inflated.The One Wing is made for equipment with a negative weight in water that does not exceed 19 kg (41.6 lbs) and has a lifting capacity of 225 N. It comes with a double, non­flex tank­band tank attachment system and can also be equipped with integrated weight pockets, accessory pockets, metal back plate, pinbolt kit and D­rings.The standard size has a waist belt with three rows of 40 cc holes; and the large size has six rows.This is a superb high­performing harness with ergonomic properties developed from advanced backpacks, and a unique variety of adjustment options to optimize both fit and comfort.The One Harness is an enhanced version of the Besea Advanced harness. We have made the shoulder straps narrower and integrated the waist belts and lumbar support in to one belt with the same ergonomic advantages but a better fit. All Poseidon Wings wings can be mounted.

ScubaStorePoseidon One Wing 50 Blue

Find on Amazon.com: Poseidon One Wing 50 Blue

Scubapro X-tek Hs Wing 27kg Retractor

Scubapro X-tek Hs Wing 27kg Retractor
Scubapro – Scubapro X-tek Hs Wing 27kg Retractor

Scubapro X-tek Hs Wing 27kg Retractor. Features:- Horseshoe Wing- 1680 DEN Ballistic Nylon outer shell- 420 DEN Nylon inner bladder- Tek Inflator with stainless steel buttons- Available with 27 kg lift capacity- D.I.R. version, without bungees!

ScubaStoreScubapro X-tek Hs Wing 27kg Retractor

Find on Amazon.com: Scubapro X-tek Hs Wing 27kg Retractor